Wood splitter 25 ton PTO & 400V 5.5 kW motor with log lifter NEW 2y warranty
Highly professional 25 tons of wood splitter with 400 V 5.5 kW motor and alternative PTO !
25 tons of splitting pressure .
Drive either via PTO or by the 400V motor
Fast forward and rewind. Large power stroke of the piston gap
Two hand safety control
Manual or automatic return
Compact and transportable with retracted cylinder
Effortless making the operational readiness
Log lifter for ergonomic working
Drive either electric motor 400V ( 380V ) V/50Hz / 5,500 watts ( 5.5 kW) / S6 40 % IP54
or PTO connection standard 34.8 mm 6 Teeth (1 3/8'' 6 teeth ) max. 540U/min min. 25 hp
Maximum force of 25 tons
Spaltgutgrößen of about 55 cm in diameter , depending on the species and nature
Spaltgutgrößen manufacturer's recommendation 110 cm length x 45 cm Ø
Wood Length 110cm maximum / minimum 35cm
Arbeitshubub 94.5 cm
Speed forward ( fast) ca.11 , 5 cm / sec with approximately 12.5 tons splitting pressure
Speed work running about 4.6 cm / sec with 25 tons Speltdruck
Speed rewind about 6.5 cm / sec
Hydraulic oil 30 liters HLP32
Hydraulic oil pressure both pumps 22 MPa
Noise at idle 80.1 dbA
Noise under full load 92.5 dbA
Dimensions ( min. / max. ) H x W x D in cm 188 x 66 x 70/250 x 110 x 70
Weight about 379 kg
Shipping Dimensions H x W x D in cm 196 x 70 x 75 approx 385kg
Specifications are subject to change at any time
The operational readiness can be produced without any effort. Thanks to the included support ( Fig. 1) , the cylinder moves by its own drive to the operating position ( Fig. 2). You need this there only to lock .
Thanks to the integrated master lifter a very ergonomic work is possible. Do not need the log lifter , it can be engaged and serves as the second guard .
TWO WORKING SPEEDS OF HYDRAULIC PISTON
Press both operating lifting completely down , the piston moves with 2.5 times the speed down . He developed about ½ of the maximum splitting force .
Move just before the impact of the wedge on the wood one of the two control levers back a bit to the top ( 2-3 cm ), the piston movement slows . Now the device develops the specified maximum splitting force .
Two different operating modes are selectable by the simple on or removing a spring ( Fig. 1):
Hooked first spring , manual rewind. the piston remains when you release the control levers are in any position and only retracts when pushing the operating lever .
Posted 2 spring with automatic rewind . When you release the control lever , the piston moves back up to the desired Strel Lung .
This position can be continuously adjusted with a handle ( Fig. 2). This allows you adjust the splitting stroke the length of your Spaltguts . This saves a lot of time and energy.
► Robust , powerful device for continuous use
► Two hand safety control
► The integrated safety concept holds hands during the operation of the danger zone !
► PHASE TURNER : If your domestic electrical system has a reversed direction of rotation of the phases , which is no problem with our splitters ! Using a screwdriver can change the phase rotation in the " twinkling of an eye " .
► To transport or for storage can retract the cylinder space.
Scope of delivery:
► log splitter LS25T PTO + E400V with log lifter
► filled with hydraulic oil
Filled ► PTO gearbox with gear oil
► Manual in German
For operation you need:
► Either a suitable drive machine with PTO connection min . 25PS
► or 400V CEE connector cable 16A , maximum 25 meters , at least 5x2, 5mm ² wire cross-section !