The flail mower EFGC-175 is distinguished by its sturdy construction. It has a specially reinforced bevel gear and is excellent as a cutting mower, etc. PTO operated
The operator has a cutting width of 172 cm and is driven by the PTO included.
This mower has the heaviest gear in its class. In contrast to a lightly-equipped Y knives mowers, mower has this thanks to the high flywheel, which is due to the heavy hammer knife and the heavier shaft, superior performance characteristics. The 28 specially hardened, 0.8 kg hammer knives, which are arranged in 4 rows around the drive shaft, crushing the cut to a minimum. Also very tall grass, bushy or straw-clippings are no problem with this mower!
In addition, the mower has a very heavy rear roller and a freewheel gear.
The cutting height can be adjusted via the top link and the side-mounted skids. Oscillating, galvanized slats on the front of the mower prevent the escape of stones etc.
The mower is hung in the three-point hitch of your tractor (from Cat. I upwards).
Your tractor should have at least 30 hp.
From the center of the suspension to the right the amount is 116 cm; with this measure, you can control whether the mower covers the right lane of your tractor.
spare parts supply. We always have any part in stock in stock please email request
Length: 1840 mm
Width: 700 mm
Cutting width: 1720mm
Weight: 358 kg
U / min .: 540
Drive: 3 Piece Timing Belt 17X991 LI
Packing: wooden box
Pack. Dimension: 190x76x90 cm (L x W x H)
Recording: Three-point hitch cat-I.
Tug: min. 30 hp
12 month warrenty on all working parts
The mower is delivered in a sturdy wooden box. The gear box is dry and before setup fill with oil (80W90, about 1 liter) is required.