The Flail mower EFGC-220 is distinguished by its sturdy construction. It has a specially reinforced bevel gear and is excellent as a mower, etc. PTO operator used.
The operator has a cutting width of 217 cm and is driven by the PTO included.
This mower has the heaviest gear in its class. In contrast to a lightly-equipped Y knives mowers, mower has this thanks to the high flywheel, which is due to the heavy hammer knife and the heavier shaft, superior performance characteristics. The 36 specially hardened, 0.8 kg hammer blade which are arranged in four rows about the drive shaft, crushing the cuttings to a minimum. Also very tall grass, bushy or straw-clippings are no problem with this mower!
In addition, the mower has a very heavy rear roller and a freewheel gear.
The cutting height can be adjusted via the side-mounted skids. Oscillating, galvanized slats on the front of the mower prevent the escape of stones etc.
The mower is hung in the three-point hitch of your tractor (from Cat. I upwards).
Your tractor should have at least 60 hp.
Compare our products with competitors! You will not find anything like as fast.
spare parts supply. We always have any part in stock please email parts request form
Cutting width 2160 mm
Weight: 470 kg
Timing: 4 pieces: 17x991LI
U / min .: 540
Number of hammers: 36
Drive: 4 Piece Timing Belt 17X991 LI
Packing: wooden box
Pack. Dimension: 240x85x90 cm (L x W x H)
Recording: Three-point hitch cat-I.
Tug: min. 60 hp
The packaging consists of a sturdy wooden box. The gear box is dry and before setup fill with oil (80W90, about 1 liter)