The tracked Jansen RD-500 is the latest in our series dumper. The special feature is the hydrostatic drive!
The dumper is self-propelled and the trough can be tilted. For this purpose, a hydraulic unit and a hydraulic cylinder has been installed on the machine. This function sets our site dumpers from the competition! The raising and lowering operation takes place within a few seconds. The tray has a size of 1000x670x450 mm.
The RD-500. We provide an amplified version of the machine with a likewise reinforced hollow (wall thickness 3 mm). Unlike many other offerings the cavity on the discharge is straight and tapered at our RD-500 - which facilitates the dumping of bulk loads. With tapered recesses the bulk material wedged during the tipping very quickly.
Through its chain drive this Dumper is suitable for particularly difficult terrain. Also gradients can be handled easily.
The drive of the RD-500 has been implemented purely hydrostatic - this type of drive offers a lot of advantages:
stepless speed control
linear motion drive with high efficiency
Safe and fast-acting overload protection
very long service life
wear as little friction occurs as in the conventional transmission
Starting from standstill under full load possible
The 9 hp petrol engine has a very good light-off (at low temperatures) and can be started by pull starter.
Both in forward and in reverse, there are two speeds:
1 Forward speed: 5 km / h
2 Forward speed: 2.5 km / h
1 reverse speed: 3 km / h
2 reverse speed: 1.25 km / h
The unique design of the stable operator platform allows the operator comfortable ride. If the platform is not used, it can be folded upwards. The handling is due to the intuitive controls very easy and comfortable.
The machine is ideal for transporting sand, earth, gravel, stones, etc. You can payload capacity of up 500 kilograms; This is an overview of the load and performance:
Flat terrain: payload up to 500 kg
17% and 10 degree slope: up to 450 kg
30% and 17 degree incline: to 375 kg
Compare our products with competitors! You will not find anything like as fast.
Not only did we even developed these devices, but this offer is also a competent service (master workshop) and spare parts supply. We usually have any part in stock.
When you have questions or problems we are personally by phone sideways. With us you will speak with knowledgeable people and not with "call center agents"!
We have built our every item ready in an exhibition hall. You are welcome to test!
4-stroke OHV engine, 9 hp, 6.6 kW ( loncin Motor) copy of the Honda 330 GX
Starter: Recoil starter
Speed: maximum 5 km / h
Fuel tank capacity: 3.6 liters
Loading capacity: max. 500 kg at 30% incline even 375 kg
Total Weight (dry): 340 kg
Dimensions: 1900x720x1380 mm (LxWxH, dump above)
Dimensions Breech: 1000x670x450 mm
Drive trough: hydraulic
Spares no problem , warrenty commercial use 12 months , home use 24 months