The AGF-140 Mower is characterized by its particularly rugged construction. In contrast to the lighter versions AGL-140, AGL-145, etc., these are the most difficult version (higher material thicknesses, etc.) this mower. The heavy 1.2 kg are at this Mower - installed and not the usual 800 g - blades. The Jansen AGF-140 has a specially reinforced angular gear. Through the lateral displacement of the cutting deck can very easily be ditches, mowing the banks areas, earthworks etc..
If the mower is outsourced to the maximum to the side, the dimension between the middle of the tractor and the outer edge is approx 224 cm.
Furthermore, the Jansen AGF-140 has a collision. This activate upon contact with obstacles such as Stones and wood , etc. and leaves the mower aside and upward swing in order to minimize the risk of major damage.
Our Hedge mower AGF-140 has a cutting width of 138 cm and is driven by the PTO included. It can be moved to the left and right and you can bend it (up 90 ° and down 55 °). For these functions you need 2 Hydraulic control circuits on your tractor / tractor, because the deck of this 2 double-acting hydraulic cylinder features.
The cutting height can be adjusted via the side-mounted runners. 12, specially hardened, 1.2 kg heavy hammer knives, which are arranged in four rows about the drive shaft, crushing the cuttings to a minimum. Even very tall grass, bushy or straw-cuttings are not a problem for this deck!
In addition, the AGF-140 has a very heavy rear roller and a freewheeling gear.
Oscillating, galvanized slats on the front of the mower to prevent the escape of stones etc.
The mower is hung in the three-point hitch of your tractor (from Kat. II, with a slight adjustment also Cat. I).
The 20 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower!
Your tractor should have at least 40 hp.
We not only have developed this mower, but this offer is also a competent service (master workshop) and the supply of spare parts to. We have all parts in stock.